Wednesday, February 20, 2019 Useful Resources for Industrial Technology Enthusiasts!



The extra bits required when addressing, error correction, etc. are used. Overhead is also used to refer to the extra time needed for receivers and transmitters to key up (turn on) and for modems to synchronize.

Find more about    Overhead

Top 20 Industry Tags (Viewed during Last Hour):

FM (Frequency Modulation) ../ Thermocouple J-Type ../ Carrier Sense ../ Bit ../ Cyclical Redundancy Check ../ Response Time ../ Thermocouple B-Type ../ kHz (Kilohertz) ../ BLOB ../ RTS (request to send) ../ CTS (Clear to Send) ../ UHF (Ultra High Frequency) ../ OEM ../ Modem ../ CRC ../ GHz (Gigahertz) ../ FHSS (Frequency Hopping Spread Spectrum) ../ Datablock or Poll Record ../ DTE (Data Terminal Equipment) ../ Full Duplex Repeater ../ See More..

<< Back


Site customized for Screen Resolution - 1400 x 1050
Site Map    I    Copyright © 2019 Automation Media. All rights reserved.